Wireframe Section: Primary Area

The primary area of the Wireframe section provides commands for managing wireframe elements.

This page discusses:

Flyout for Creating Planar Sections
Flyout for Performing Transformations on Clouds


	Free Edges Creates the free edges of a mesh as scans or curves. See Creating Free Edges.
	Planar Sections See Flyout for Creating Planar Sections.
	Curve Projection Projects scans or curves onto a cloud of points or a mesh. See Projecting Curves or Scans.
	Curve from Scan Creates curves from a scan or a set of scans. See Creating Curves from Scans.
	Sketch from Scan Retrieves basic primitives from planar scans. The primitives are then created as sketches. See Creating a Sketch from Scan.
	3D Curve Creates a 3D Curve using control points. See Creating 3D Curves.
	Fictive Edge Creates a fictive edge from an existing curve or from picks. See Creating a Fictive Edge.
	Curves Network Preparation Creates a set of curves on the selected mesh. See Preparing Curves Networks.
	Curves Network Creates a network of constrained curves. See Creating a Curves Network.
	Point Creates points. See Creating Points.
	Line Creates lines. See Creating Lines.
	Plane Creates planes. See Creating Planes.
	Circle Creates circles or circular arcs. See Creating Circles.
	Translate See Flyout for Performing Transformations on Clouds.
	Contrast Map Creates a Contrast Map. See Analyzing the Characteristic Lines of the Mesh with a Contrast Map.
	Mesh Shape Analysis Identifies homogeneous curvature areas into a color map. See Analyzing the Mesh.
	Curvature Map Creates a Curvature Map. See Creating a Curvature Map.
	Porcupine Analysis Creates a visual representation of the point, tangent, and curvature continuity of curves and surfaces. See Analyzing Using Porcupine Curvature.
	Deviation Analysis Analyzes the deviation between reference objects and objects to measure. See Performing a Deviation Analysis.

Flyout for Creating Planar Sections


	Planar Sections Creates planar sections by cutting a cloud of point or a mesh by planes. See Creating Planar Sections.
	XYZ Automatic Planar Sections Creates planar sections from a digit along the 3 directions of any axis system. See Creating Automatic Planar Sections.

Flyout for Performing Transformations on Clouds


	Translate Translates an element along a direction. See Translating Geometry.
	Rotate Rotates geometry around an axis. See Rotating Geometry.
	Symmetry Transforms geometry by applying a symmetry. See Performing a Symmetry on Geometry.
	Scaling Transforms geometry by scaling. See Transforming Geometry by Scaling.
	Affinity Transforms geometry by affinity. See Transforming Geometry by Affinity.
	Axis To Axis Transforms elements from an axis to another. See Transforming Elements from an Axis to Another.