S

This section describes each Abaqus input option that begins with S, including the intended use, Abaqus product support, whether it is model or history data, and the relevant parameters and data lines.


In this section:

*SCALE MASS
*SCALE STIFFNESS
*SCALE STRESS DESIGN
*SCALE THERMAL CONDUCTIVITY
*SECTION CONTROLS
*SECTION CURVATURE
*SECTION FILE
*SECTION INERTIA
*SECTION ORIGIN
*SECTION POINTS
*SECTION PRINT
*SECTION STIFFNESS
*SECTION TANGENT
*SELECT CYCLIC SYMMETRY MODES
*SELECT EIGENMODES
*SFILM
*SFLOW
*SHEAR CENTER
*SHEAR FAILURE
*SHEAR RETENTION
*SHEAR TEST DATA
*SHELL GENERAL SECTION
*SHELL SECTION
*SHELL TO SOLID COUPLING
*SIMPEDANCE
*SIMPLE SHEAR TEST DATA
*SLIDE LINE
*SLOAD
*SOFT ROCK HARDENING
*SOFT ROCK PLASTICITY
*SOFTENING REGULARIZATION
*SOILS
*SOLID SECTION
*SOLUBILITY
*SOLUTION TECHNIQUE
*SOLVER CONTROLS
*SORPTION
*SPECIFIC HEAT
*SPECTRUM
*SPH SURFACE BEHAVIOR
*SPRING
*SRADIATE
*STATIC
*STEADY STATE CRITERIA
*STEADY STATE DETECTION
*STEADY STATE DYNAMICS
*STEADY STATE TRANSPORT
*STEP
*SUBCYCLING
*SUBMODEL
*SUBSTRUCTURE CHANGE
*SUBSTRUCTURE DAMPING
*SUBSTRUCTURE DAMPING CONTROLS
*SUBSTRUCTURE GENERATE
*SUBSTRUCTURE LOAD CASE
*SUBSTRUCTURE MATRIX OUTPUT
*SUBSTRUCTURE MODAL DAMPING
*SUBSTRUCTURE OUTPUT
*SUBSTRUCTURE PATH
*SUBSTRUCTURE PROPERTY
*SUPERELASTIC
*SUPERELASTIC HARDENING
*SUPERELASTIC HARDENING MODIFICATIONS
*SURFACE
*SURFACE BEHAVIOR
*SURFACE FLAW
*SURFACE INTERACTION
*SURFACE PROPERTY
*SURFACE PROPERTY ASSIGNMENT
*SURFACE SECTION
*SURFACE SMOOTHING
*SWELLING
*SYMMETRIC MODEL GENERATION
*SYMMETRIC RESULTS TRANSFER
*SYSTEM