Model Section: Primary Area

The primary area of the Model section provides commands for creating Sheet Metal for hydro-formed features.

This page discusses:

Positioned Sketch
Creates a positioned sketch.
See Creating a Positioned Sketch from the Part Design User's Guide.
Sheet Metal Parameters
Creates and modifies the Sheet Metal parameters used to define your first feature.
See Editing the Sheet Metal Parameters.
Point
See Flyout for Creating Reference Elements.
Point or Curve Mapping
Creates a point or a curve in the unfolded view from an object in the folded view and conversely.
See Mapping Elements.
Web
Creates a web from a plane, a closed sketch or a surface.
See Creating Webs.
Surfacic Flange
Creates a flange from a spine and a profile.
See Creating Surfacic Flanges.
Joggle
Creates a feature embedding two joggles with the same depth value and direction, and with opposite runout directions.
See Creating Joggles.
Twin Joggle
Creates a feature embedding two joggles with the same depth value and direction, and with opposite runout directions.
See Creating Twin Joggles.
Flange
See Flyout for Creating Flanges.

Flyout for Creating Reference Elements

Point
Creates a point.
See Creating Points.
Line
Creates a line.
See Creating Lines.
Plane
Creates a plane.
See Creating Planes.

Flyout for Creating Flanges

Flange
Creates a flange using a spine.
See Creating Flanges.
Hem
Creates a hem using a spine.
See Creating Hems.
Tear Drop
Creates a tear drop from a spine and a profile.
See Creating Tear Drops.
User Flange
Creates a flange from a spine and a manually-defined profile.
See Creating User Flanges.