Review Section


	On the Fly Information See Flyout for Retrieving Information on the Fly
	Stacking Management Manages the stacking interactively and enables the selection of Composites entities in some commands. See Using the Stacking Management.
	Check Contours Checks and validates contours of plies. See Checking Contours.
	Numerical Analysis Performs a numerical analysis to compute the area, mass, center of gravity and mass on a ply, a sequence , a plies group, or a stacking. See Performing a Numerical Analysis.
	Plies Section Creates section views of the stacking or of plies, without exploding the plies beforehand. See Creating Plies Sections.
	Section Properties Computes the beam properties from a section, to analyze the structure using finite elements. See Retrieving the Properties of a Beam Section.
	Ply Exploder Generates an exploded view of the plies by creating an offset surface for each ply. See Exploding Plies.
	Multiple Core Samples Creates and reviews one or several core samples. See Creating Core Samples.
	Producibility Inspection Retrieves and exports the fiber deformation and deviation information of several plies to detect manufacturability problems. See Inspecting the Producibility.
	Fiber Direction Displays theoretical fiber directions of a given ply by indicating a point inside the ply geometry. See Displaying the Fiber Direction.
	Rosette Preview Previews the transfer of the rosette on a selected surface, to check the fiber direction. See Previewing the Rosette.
	Rosette Transfer Curve Creates a curve on the reference surface from the rosette transfer information. See Creating a Rosette Transfer Curve.

Flyout for Retrieving Information on the Fly


	On the Fly Information Displays on the fly information about Composites components. See Displaying Information on the Fly.
	On the Fly Information for Plies Groups Retrieves information on the plies groups See Displaying Information on the Fly.
	On the Fly Information for Sequences Retrieves information on the sequences. See Displaying Information on the Fly.
	On the Fly Information for Plies or Inserts Retrieves information on plies or inserts. See Displaying Information on the Fly.
	On the Fly Information for Cut-Pieces Retrieves information on cut-pieces. See Displaying Information on the Fly.
	On the Fly Information for Limit Contours Retrieves information on limit contours. See Displaying Information on the Fly.
	On the Fly Information for Limit Contour Groups Retrieves information on limit contour groups. See Displaying Information on the Fly.
	On the Fly Information for Flatten Retrieves information on the flatten element. See Displaying Information on the Fly.
	On the Fly Information for Producibility Retrieves information on the producibility. See Displaying Information on the Fly.
	On the Fly Information for Material Excess Retrieves information on material excess. See Displaying Information on the Fly.
	On the Fly Information for Skin Swapping Retrieves information of the Skin Swapping element. See Displaying Information on the Fly.