Axial Machining Section

The Axial Machining section of the action bar provides commands for creating Axial Machining operations.

This page discusses:

Flyout for Creating Patterns
Flyout for Creating Drilling Operations
Flyout for Creating Tapping Operations
Flyout for Creating Boring Operations
Flyout for Creating Axial Finishing Operations
Flyout for Creating Sequential Axial Operations


	Automatic Hole Search See Flyout for Creating Patterns.
	Drilling See Flyout for Creating Drilling Operations.
	Spot Drilling Creates a Spot Drilling operation. See Creating a Spot Drilling Operation.
	Boring See Flyout for Creating Boring Operations.
	Axial Finishing See Flyout for Creating Axial Finishing Operations.
	T-Slotting Creates a T-slotting operation. See Creating a T-Slotting Operation.
	Tapping See Flyout for Creating Tapping Operations.
	Thread Milling Creates a Thread Milling operation. See Creating a Thread Milling Operation.
	Circular Milling Creates a Circular Milling operation. See Creating a Circular Milling Operation.
	Sequential Axial See Flyout for Creating Sequential Axial Operations.

Flyout for Creating Patterns


	Automatic Hole Search Searches holes and creates machinable axial features. You can create machinable axial features by selecting a part or the faces of the hole and filter out similar holes based on dimension or topology. See Creating Hole Features Automatically.
	Automatic Pattern Creation Creates machining patterns automatically from existing machinable axial features. See Creating Machining Patterns Automatically.
	Machining Pattern Creates a machining pattern which you can then reference in a Drilling operation. See Creating Machining Patterns.
	Global Feature Recognition Creates all prismatic machinable features (prismatic machining areas, machinable axial features and patterns) to prepare a design part automatically. You can also use the same method to update existing machinable axial features. See Creating Prismatic Machinable Features Globally.
	Local Feature Recognition Creates a prismatic machinable feature locally. See Creating a Prismatic Machinable Feature Locally.

Flyout for Creating Drilling Operations


	Drilling Creates a Drilling operation. See Creating a Drilling Operation.
	Drilling Dwell Delay Creates a Drilling Dwell Delay operation. See Creating a Drilling Dwell Delay Operation with the Legacy Interface.
	Drilling Deep Hole Creates a Drilling Deep Hole operation. See Creating a Drilling Deep Hole Operation with the Legacy Interface.
	Drilling Break Chips Creates a Drilling Break Chips operation. See Creating a Drilling Break Chips Operation with the Legacy Interface.

Flyout for Creating Tapping Operations


	Tapping Creates a Tapping operation. See Creating a Tapping Operation.
	Reverse Threading Creates a Reverse Threading operation. See Creating a Reverse Threading Operation with the Legacy Interface.
	Thread Without Tap Head Creates a Thread without Tap Head operation. See Creating a Thread without Tap Head Operation with the Legacy Interface.

Flyout for Creating Boring Operations


	Boring Creates a Boring operation. See Creating a Boring Operation.
	Boring Spindle Stop Creates a Boring Spindle Stop operation. See Creating a Boring Spindle Stop Operation with the Legacy Interface.
	Back Boring Creates a Back Boring operation. See Creating a Back Boring Operation with the Legacy Interface.

Flyout for Creating Axial Finishing Operations


	Boring and Chamfering Creates a Boring and Chamfering operation. See Creating a Boring and Chamfering Operation with Legacy Interface.
	Counter Boring Creates a Counter Boring operation. See Create a Counterboring Operation with Legacy Interface.
	Counter Sinking Creates a Counter Sinking operation. See Creating a Counter Sinking Operation with Legacy Interface.
	Chamfering 2 Sides Creates a Chamfering 2 Sides operation. See Creating a Chamfering 2 Sides Operation with Legacy Interface.
	Reaming Creates a Reaming operation. See Creating a Reaming Operation with Legacy Interface.

Flyout for Creating Sequential Axial Operations


	Sequential Axial Creates a Sequential Axial operation. See Creating a Sequential Axial Operation with the Legacy Interface.
	Sequential Groove Creates a Sequential Groove operation. See Creating a Sequential Groove Operation with the Legacy Interface.