Device Section: Primary Area

The primary area of the Device section provides commands for creating electrical devices from 3D Shapes or 3D Parts and for adding connection points to electrical devices.

This page discusses:

Equipment
Creates an electrical equipment.
See Defining an Equipment.
Support
Creates a standard support.
See Creating Supports.
Backshell
Adds an electrical behavior of backshell type to a part.
See Flyout for Managing Devices.
Backshell Connection Point
Adds or edits a backshell connection point.
See Flyout for Managing Connection Points.
Remove Electrical Behavior
Removes the electrical behavior from devices and deletes their connection points.
See Removing Electrical Behavior.

Flyout for Managing Devices

Backshell
Defines a 3D shape as a backshell.
See Defining a Backshell.
Connector
Defines a 3D shape as a connector.
See Defining a Connector.
Electrical Behavior
Adds electrical behavior to a fluidic part, a space reference, an equipment, a product, or a part.
See Adding Electrical Behavior to a Fluidic Part.
Contact
Defines a 3D shape as a contact.
See Defining a Contact.
Filler Plug
Defines a 3D shape as a filler plug.
See Defining a Filler Plug.
Mounting Equipment
Defines a 3D shape as a mounting equipment.
See Defining a Mounting Equipment.
Shell
Defines a 3D shape as a shell.
See Defining a Shell.

Flyout for Managing Connection Points

Backshell Connection Point
Adds a backshell connection point to a device.
See Adding a Backshell Connection Point.
Cavity
Adds a cavity to a device.
See Adding a Cavity.
Cavity Connection Point
Adds a cavity connection point to a device.
See Adding a Cavity Connection Point.
Connector Connection Point
Adds a connector connection point to a device.
See Adding a Connector Connection Point.
Segment Connection Point
Adds a segment connection point to a device.
See Adding a Segment Connection Point.
Segment Position Point
Adds a segment position point to a device.
See Adding a Segment Position Point.
Shell Connection Point
Adds a shell connection point to a device.
See Adding a Shell Connection Point.


Junction Point
Adds a junction point to a device.
See Adding a Junction Point.