|
- Manage Fallible References
- Opens the Fallible Reference Editor.
- Create fallible references and add failure modes.
See Creating Fallible References.
Note:
This command is also available from the home page.
|
|
- Create Causality Relationship
- Adds one row in the selected FMEA table to create a causality relationship.
|
|
- Create Analysis
- Creates an FMEA table analysis.
- In the structure tree,
- If an element is selected, an FMEA table is associated with this element.
- If no element is selected, an FMEA reference table is created.
See Associating FMEAs with a System.
Note:
This command is also available from the home page for the creation of reference tables.
|
|
- Load/Unload Analysis
- Loads or unloads the FMEA, which is selected in the structure tree.
See Associating FMEAs with a System.
|
|
- Save
- Saves the content of the FMEA.
- This command is only available if the Enable autosave option is deactivated.
|
|
- Delete
- Deletes the selected element from the PLM database.
- Select an FMEA from the Structure Tree, a causality relationship by selecting its line at the left, a fallible reference or a failure mode in the Fallible Reference Editor, or an element in a line such as a failure mode.
|
|
- Add/Edit Characterization
- See Flyout for Managing Characterizations.
|
|
- Select Template
- Associates the selected an FMEA template with the analysis.
- Select an FMEA template to replace the current one.
See Replacing an FMEA Template.
|
|
- Properties
- Displays the properties of the selected element if it is
stored in the database.
|
|
- Refresh Computed Attributes
- Refresh computed attributes for the selected lines or the whole table.
- To use this command, the template associated with the table must enable a manual refresh of the computed attributes.
See Refreshing Computed Attributes.
|
|
- Generate Failure Modes
- Generates failure modes from a template and associates them with implemented functions without failure modes.
Note:
To use this command, the template associated with the table must contain a list of failure modes.
|
|
- Display Calculated Effects: One Level
- See Flyout for Displaying Calculated Effects.
|
|
- Filter Ambiguity Group
- Filters a group of ambiguities.
- Select a failure mode. Its group of ambiguities is filtered.
Note:
To use this command, the template associated with the FMEA table must contain symptoms.
See Filtering Causality Relationships.
|
|
- Hide or Show Columns
- Customizes the current FMEA view.
Note:
This command does not modify the template associated with the table.
|
 |
- Reroute to Another Revision
- Reroutes the FMEAs, associated with a system to be analyzed, to a revised system.
See Rerouting FMEAs.
|
 |
- Edit Mode
- Switches between view and edit modes.
- By default, the edit mode is activated.
See Customizing Preferences.
|
 |
- Compare Revisions
- Compares two revisions of an FMEA table.
- Open a revision of an FMEA table, then select another revision of this FMEA table, in the same branch or in another branch.
See Comparing FMEA Tables.
|
