Context Toolbars

Context toolbars are smart toolbars that contain only those commands that can be applied to the current selection. While some are specific to particular types of elements, others are more general and appear on multiple elements where they are relevant.

The following tables show some of the context toolbar commands.

This page discusses:

Rebar Edition

Rebar Manipulation
Manipulates rebar layers with the robot.
Select the rebar layer to manipulate with the robot.
See Manipulating Extracted Bars.
Rebar Extraction
Extracts bars from a rebar layer.
See Extracting Bars from a Rebar Layer.
Rebar Integration
Integrates an extracted bar or an extracted group of bars inside a rebar layer.
See Reintegrating Bars in a Rebar Layer.

Rebar Manipulation

Permutation
Performs a 90° permutation of all axis that belong to the axis system.
See Manipulating Extracted Bars.
Swap Axis
Swaps the axis ( X and Y), (Y and Z) or (Z and X) of the axis system.
See Manipulating Extracted Bars.
Invert Axis
Inverts the directions (X or/and Y or/and Z) of the axis system.
See Manipulating Extracted Bars.
Exit
Validates the modifications and exits the Manipulation command.
See Manipulating Extracted Bars.

Rebar Support Axis Modification for Fixed Rebars

Replace
Replaces the corresponding element.
See Creating an Adaptive Limit Planes Rebar Layer
Edit Axis System
Edits the corresponding element.
Move
Moves the corresponding element.
Isolate
Isolates the corresponding element.
See Performing Basic Operations on Rebar Features
Edit Pattern
Edits the pattern.
See Creating a Follow-up Surface Rebar Layer along a Curve.

Strap Mode Tools

Replace
Replaces the bar to strap by another bar.
See Creating Rebars around Existing Bars and Strap Design.
Insert Before
Inserts a new bar to strap before the current one.
See Creating Rebars around Existing Bars and Strap Design.
Insert After
Inserts a new bar to strap after the current one.
See Creating Rebars around Existing Bars and Strap Design.
Change Side
Changes the passing side (outer or inner) around the first or last support bar.
See Creating Rebars around Existing Bars and Strap Design.
Remove
Removes the selected bar.
See Creating Rebars around Existing Bars and Strap Design.
Closure
Manages closure (the first bar has to be selected as the last bar). As an example applies to a frame reinforcing bar.
See Creating Rebars around Existing Bars and Strap Design.

Mesh Mode Tools

Replace
Replaces the current support bar by another bar.
See Creating Rebars on Existing Bars and Mesh Design
Change Side
Changes the support side of the reinforcing mesh.
See Creating Rebars on Existing Bars and Mesh Design
Select All
Selects all bars that belong to the support rebar layer (from the first bar to the last bar).
See Creating Rebars on Existing Bars and Mesh Design