Conjugate Heat Transfer in a Fan-Cooled CPU Board

This example guides you through creating and performing fluid simulations on the 3DEXPERIENCE platform.

You will learn how to:

• Create a fluid domain and a 3D mesh.
• Choose thermal interaction models, specify the flow behavior, and define the inlet and outlet conditions.
• Create and run a fluid simulation.
• View the flow patterns and create path plots to evaluate the performance of the model.

Prerequisites
Introduction
Create the Simulation
Create the FEM and Define the Fluid Domain
Assign Materials
Mesh the Model
Define the Physics
Apply Thermal Conditions
Apply Inlet/Outlet Flow Conditions
Run the Simulation
Analyze the Results