|
- Stacking
- Creates the main root node that contains all the layers of the
3DPart.
See Creating the Stacking.
|
 |
- Layer Group
- Creates a node to group layers that fulfill a given function.
See Creating a Layers Group.
|
 |
- Laminate
- Creates a laminate
See Creating the Laminate.
|
 |
- Formulation
- Creates a formulation.
See Creating a Formulation.
|
 |
- Layer
- Creates a layer to represent a given material laid on top of another
layer.
See Creating a Standard Layer.
|
 |
- Elastic Layer
- Creates a layer with an elasticity ratio.
See Creating an Elastic Layer.
|
 |
- Liquid Layer
- Creates a layer typed as LIQUID.
See Creating a Liquid Layer.
|
 |
- Relation Layer
- Creates a layer to bind two other layers that are directly above and
below.
See Creating a Relation Layer.
|
 |
- Mechanical Bond
- Binds several layers or several layers groups, using a mechanical feature and a geometry.
See Creating a Mechanical Bond.
|
 |
- Embossing
- Creates an embossing.
|
 |
- Extrusion
- Creates an extrusion.
|
 |
- Stitching Bond
- Creates a Stitching Bond
See Creating a Stitching Bond.
|
 |
- Density Layer
- Creates a layer where a material ratio is applied to each cell of a grid.
See Creating a Density Layer.
|
 |
- Profile Layer
- See Flyout for Profiles Layers
|
 |
- Sweep Layer
- Creates a sweep layer defined by a cross section and guides.
See Creating a Density Layer.
|