Primary Area

The primary area of the Creation section provides commands for creating curves and surfaces.

This page discusses:

Flyout for Creating Wireframe Elements
Flyout for Creating an Axis System
Flyout for Creating Curves
Flyout for Creating Patches
Flyout for Filling Spaces between Surfaces


	Point See Flyout for Creating Wireframe Elements
	Axis System See Flyout for Creating an Axis System
	3D Curve Creates a 3D curve using control points, possibly on a support element. See Creating Curves Using Control Points.
	Isoparametric Curve See Flyout for Creating Curves
	Blend Curve Creates a connecting curve between two curves. See Creating Blend Curves.
	Styling Corner Joins two planar curves with a connecting curve. See Creating Styling Corners. This command is only available in FreeStyle Shape Design.
	Unified Patch See Flyout for Creating Patches This command is only available in FreeStyle Shape Design.
	Fill See Flyout for Filling Spaces between Surfaces
	Extrude Surface Creates a surface by extruding a curve. See Extruding Surfaces.
	Offset Creates a surface that is offset from a reference surface. See Offsetting Surfaces. This command is only available in FreeStyle Shape Design.
	Net Surface Creates a surface based on an existing set of curves. See Creating a Net Surface.
	Styling Sweep Creates a surface by sweeping a profile along a curve. See Creating a Styling Sweep.
	Blend Surface Creates a blended surface between two surfaces. See Creating Blend Surfaces.
	FSS Styling Fillet Creates a styling fillet between two surfaces. See Creating a Styling Fillet.

Flyout for Creating Wireframe Elements


	Point Creates a point.
	Line Creates a line.
	Plane Creates a plane.
	Create Robot plane Creates a plane corresponding to the Robot basis. See Managing the Robot and Axes.
	Circle Creates circles and circular arcs.

Flyout for Creating an Axis System


	Axis System Defines a new three-axis system locally either by selecting geometry or by entering coordinates. See Defining an Axis System
	Create Axis System from Robot Creates a new axis system in the work area. See Create an Axis System using the Robot.

Flyout for Creating Curves


	Isoparametric Curve Creates an isoparametric curve on a surface. See Creating Isoparametric Curves on Surfaces. This command is only available in FreeStyle Shape Design.
	Curve on Surface Creates a curve on a surface, point by point, or as isoparametric or tangent curve. See Creating Free Form Curves on Surfaces.
	Project Curve Projects a curve onto a surface. See Projecting Curves. This command is only available in FreeStyle Shape Design.

Flyout for Creating Patches


	Unified Patch Creates a patch from two, three, or four points, and allows projection as well as fitting of the patch on its support. See Creating a Patch from Points.
	Geometry Extraction Creates a surface on an existing surface. See Creating a Surface on an Existing Surface.

Flyout for Filling Spaces between Surfaces


	Fill Creates a fill surface between three or more elements that must be contiguous in one point. See Creating Filling Surfaces.
	FreeStyle Fill Creates a fill surface between three or more associative elements that must be contiguous in one point. See Creating Associative Fill Surfaces.