Volume Section

The Volume section of the action bar provides commands for creating volumes.

These commands belong primarily to 3D Modeling Core: Generative Shape Design and Part Design apps and are described in the Generative Shape Design User's Guide and to which you have access below. In the Mine 3D Design app, they are available from the Wireframe and Surface section of the action bar.

This page discusses:

Flyout for Inserting Geometrical Sets
Flyout for Volume Extrude
Flyout for Add


	Geometrical Set See Flyout for Inserting Geometrical Sets.
	Positioned Sketch Creates a Sketch. See 3D Modeling: 3D Modeling Core: Sketcher User's Guide .
	Volume Extrude See Flyout for Volume Extrude.
	Multi-sections Volume Creates a multisections volume by sweeping one or more closed section curves along a spine. See Creating Multi-Sections Volumes.
	Volume Sweep Creates a swept volume by sweeping out a closed profile in planes normal to a spine curve. See Creating Swept Volumes.
	Thick Surface Adds material to a surface in two opposite directions. See Creating a Thick Surface.
	Close Surface Closes surfaces. See Creating a Close Surface.
	Draft Creates a draft by selecting a neutral element on molded 3D shapes to make them easier to remove from molds. See Creating a Draft.
	Shell Creates a cavity. See Creating a Shell.
	Thickness Adds thickness to a 3D shape. See Creating Thicknesses.
	Add See Flyout for Add.

Flyout for Inserting Geometrical Sets


	Geometrical Set Creates a geometric set. See Part Design User's Guide: Managing Geometrical Sets.
	Ordered Geometrical Set Creates an ordered geometric set. See Part Design User's Guide: Managing Ordered Geometrical Sets.

Flyout for Volume Extrude


	Volume Extrude Creates a volume by extruding a profile along a given direction. See Creating Extruded Volumes
	Volume Resolve Creates a revolution surface by revolving a planar profile about an axis. See Creating Revolved Volumes.

Flyout for Add


	Add Adds a body. See Adding Bodies.
	Remove Removes a body. See Removing Bodies.
	Intersect Intersects bodies. See Intersecting Bodies.