Modification Section

The Modification section of the action bar provides commands for modifying shapes.

This page discusses:

Flyout for Matching
Flyout for Invert and Order
Flyout for Extrapolation
Flyout for Transform
Flyout for Disassemble and Fragmentation
Flyout for Conversion
Flyout for Split


	Control Points Modifies a curve or a surface by manipulating control points. See Using Control Points.
	Feature Modeling Modifies a feature. See Modeling Features. This command is available in the ICEM Shape Morphing and ICEM Shape Design for Aero apps.
	Matching See Flyout for Matching
	Refit Adapts the shape of surfaces or curves to support elements. See Refitting Surfaces and Curves.
	Invert and Order See Flyout for Invert and Order
	Smoothing Smoothes out irregularities. See Smoothing curves and surfaces.
	Extrapolation See Flyout for Extrapolation
	Join Assemble adjacent curves or surfaces to one element.
	Break... Trims a surface or a curve into two or more parts by using any combination of points, curves, planes, and surfaces. See Breaking Surfaces. See Breaking Curves
	Untrim Restores the trimmed curve or surface to its original shape.
	Transform See Flyout for Transform
	Disassemble See Flyout for Disassemble and Fragmentation
	Conversion See Flyout for Conversion
	Move Translates and rotates elements. See Moving Geometry.
	Split See Flyout for Split

Flyout for Matching


	Matching Constraint Connects surfaces using a range of continuity constraints. See Creating a Matching Constraint.
	Multi-Side Match Surface Matches a mono-cell non-relimited surface to two to four surfaces. See Multi-Side Matching.

Flyout for Invert and Order


	Invert (Feature) Inverts and aligns the normals and directions of selected curves and surfaces. See Inverting Curves and Surfaces.
	Invert (Datum) Inverts and aligns the normals and directions of selected curves and surfaces. See Inverting Curves and Surfaces.
	Order Changes the order of curves, surfaces and faces. See Changing the local order.

Flyout for Extrapolation


	Extrapolation (Feature) Extrapolates curves and surfaces. See Extrapolating Curves and Surfaces (ICEM Shape Design command).
	Extrapolation (Datum) Extrapolates curves and surfaces. See Extrapolating Curves and Surfaces (ICEM Shape Design command).
	Styling Extrapolate Increases or decreases the length of a curve or surface boundary. See Extrapolating Curves.

Flyout for Transform


	Translate Translates point, line or surface elements along a vector.
	Rotate Rotates geometry about an axis.
	Symmetry Transforms geometry using a mirror symmetry with respect to a reference plane, line, or point.
	Scaling Scales geometry.
	Affinity Transforms geometry by affinity.
	Axis To Axis Transforms elements positioned according to a given axis system into a new axis system.

Flyout for Disassemble and Fragmentation


	Disassemble Disassembles multi-cell curves or surfaces into mono-cell or mono-domain curves or surfaces. See Disassembling Shapes.
	Fragmentation Fragments multi-arc or multi-segment elements into mono-arc or mono-segment elements. See Fragmenting Shapes.

Flyout for Conversion


	Curve Conversion Creates a curve by approximating a set of input data. See Converting Curves.
	Surface Conversion Converts a multi-cell surface to a single cell surface. See Converting Surfaces.

Flyout for Split


	Split Splits a surface or wireframe element using a cutting element.
	Trim Trims two or more surface or wireframe elements by cutting each other mutually.