Control Section


	Align using the Robot See Flyout for Aligning Clouds.
	Translate See Flyout for Performing Transformations on Clouds.
	3D Primitive Recognition Recognizes 3D primitives (basic shapes) on meshes or clouds of points. See Creating 3D Primitives.
	Planar Sections Creates planar sections by cutting a cloud of point or a mesh by planes. See Creating Planar Sections.
	Sketch from Scan (Legacy) Retrieves basic primitives from planar scans. The primitives are then created as sketches. See Creating a Sketch from Scan (Legacy).
	Deviation Analysis Analyzes the deviation between reference objects and objects to measure. See Performing a Deviation Analysis.
	Geometric Tolerances Checker Checks whether the selected mesh complies with the geometric tolerances. See Checking Geometric Tolerances.
	Annotation Set Creates an annotation set under a deviation check. See Creating Annotation Sets.
	Annotation Creates an annotation under the selected annotation set of a deviation analysis. See Creating Annotation Sets.
	Deviation Report Creates a deviation report, based on deviation analysis results and deviation annotations. See Creating Deviation Reports.

Flyout for Aligning Clouds


	Fast Alignment Aligns clouds with reference elements (clouds, meshes, surfaces or points). See Using Fast Alignment.
	Align using the Robot Aligns cloud of points roughly, using the Robot. See Aligning using the Robot.
	Align by Best Fit Aligns clouds with reference elements (clouds, meshes, surfaces or points) by best fit alignment method. See Aligning by Best Fit.
	Align with Constraints Aligns clouds of points using a selection of constraints. See Aligning Clouds with Constraints.
	Align with RPS Aligns clouds of points using a selection of Reference Points System (RPS). See Aligning with RPS.
	Align using Spheres Uses sphere recognition to reposition clouds of points. s See Aligning Clouds Using Spheres.
	Align with Previous Transformation Uses the last previously computed transformation to align clouds of points. See Aligning a Cloud Using the Previous Transformation.


	Translate Translates an element along a direction. See Translating Geometry.
	Rotate Rotates geometry around an axis. See Rotating Geometry.
	Symmetry Transforms geometry by applying a symmetry. See Performing a Symmetry on Geometry.
	Scaling Transforms geometry by scaling. See Transforming Geometry by Scaling.
	Affinity Transforms geometry by affinity. See Transforming Geometry by Affinity.
	Axis To Axis Transforms elements from an axis to another. See Transforming Elements from an Axis to Another.