|
- Classic Slot
-
Creates slots and collars on panels, plates, and stiffeners for the free
passage of stiffeners.
See Creating Slots and Collars.
|
|
- Slot with Composite
Profile
- Creates slots and collars on
panels, plates, and stiffeners for the free passage of composite
profiles.
See Creating Slot with Composite Profile.
|
|
- End Cut
- Creates end cuts of
a stiffener.
See Creating End Cuts.
|
|
- Opening on Panel and Plate
-
Creates an opening on a panel or a plate using a standard contour or a sketched
contour, or at the intersection of a 3D object with the panel or
plate.
See Creating Openings on Panel and Plate.
|
|
- Opening on
Profile
- Creates an opening on a profile
using a standard contour or a sketched contour, or at the intersection of a 3D
object with the profile.
See Creating Openings on Profile.
|
|
- Flange
- Creates a flange on
the free edge of a plate or a split plate of the panel.
See Creating a Flange.
|
|
- Scallop on Panel and Plate
-
Creates scallops on the corners or the edges of panels and
plates.
See Creating Scallops.
|
|
- Scallop on Profile
- Creates scallops at the extremities or anywhere along the length of a
profile.
See
Creating Scallops on Profiles.
|
|
- Chamfer
- Chamfers the edges of
thicker split plates, when split plates have different thicknesses or
orientations, to avoid sharp steps between them.
See Chamfering Split Plate Edges.
|
|
- Coping
- Creates detail cuts on the structure objects which are clashed with
other objects, by removing the clashed volume.
See
Creating Coping.
|