Refine Section

The Refine section provides commands for creating cutouts, holes, chamfers, and stamps.

This page discusses:

Flyout for Creating Holes
Flyout for Creating Stamps
Flyout for Creating Ribs and User Stamps


	Corner Relief Creates a local corner relief between two flanges. See Creating Local Corner Relieves.
	Corner Creates a corner to round off sharp edges of a 3D shape. See Creating Corners.
	Chamfer Creates a chamfer to cut off sharp edges of a 3D shape. See Creating Chamfers.
	Cutout Creates a cutout by extruding a profile and removing the material resulting from the extrusion. See Creating Cutouts.
	Hole See Flyout for Creating Stamps.
	Flanged Hole See Flyout for Creating Holes.
	Stiffening Rib See Flyout for Creating Ribs and User Stamps.

Flyout for Creating Holes


	Hole Creates a hole. See Creating Holes.
	Circular Cutout Creates a circular cutout. See Creating Circular Cutouts.
	Thread/Tap Creates a thread or a tap on a cylindrical element. See Creating Threads and Taps.

Flyout for Creating Stamps


	Flanged Hole Creates a flanged hole by specifying punch geometrical parameters. See Creating Flanged Holes.
	Bead Creates a local deformation in a web using a spine. See Creating Beads.
	Circular Stamp Creates a circular stamp by specifying punch parameters. See Creating Circular Stamps.
	Surface Stamp Creates a surface stamp. See Creating Surface Stamps.
	Flanged Cutout Creates a flanged cutout by specifying punch parameters. See Creating Flanged Cutouts.
	Curve Stamp Creates a curve stamp by specifying punch parameters. See Creating Curve Stamps.

Flyout for Creating Ribs and User Stamps


	Stiffening Rib Creates stiffening ribs by specifying punch geometrical parameters. See Creating Stiffening Ribs.
	User Stamp Creates stamps with punches or punches and dies. See Creating User-Stamps.