 |
-
Volume Extrude
- See Flyout for Volume Extrude.
|
 |
-
Multi-Sections Volume
- Creates a multi-sections volume by sweeping one or more closed section curves
along a spine.
- See Generative Shape Design User's Guide:
Creating Multi-Sections Volumes.
|
 |
-
Volume Sweep
- Creates a swept volume by sweeping out a closed profile in planes normal to a
spine curve.
- See Generative Shape Design User's Guide:Creating Swept Volumes.
|
 |
-
Thick Surface
- Adds material to a surface in two opposite directions.
- See Generative Shape Design User's Guide:
Creating a Thick Surface.
|
 |
-
Close Surface
- Closes surfaces.
- See Generative Shape Design User's Guide:
Creating a Close Surface.
|
 |
-
Draft
- Creates a basic draft based on the neutral element.
- See Generative Shape Design User's Guide:
Creating a Draft.
|
 |
-
Shell
- Creates a cavity.
- See Generative Shape Design User's Guide:
Creating a Shell.
|
 |
-
Thickness
- Adds thickness to a 3D shape.
- See Generative Shape Design User's Guide:
Creating Thicknesses.
|
 |
-
Add
- See Flyout for Add.
|
