Volume Section


	Positioned Sketch Creates a sketch. See Sketcher User's Guide.
	Volume Extrude See Volume Section
	Multi-sections Volume Creates a multi-sections volume by sweeping one or more closed section curves along a spine . See Creating Multi-Sections Volumes.
	Volume Sweep Creates a swept volume by sweeping out a closed profile in planes normal to a spine curve. See Creating Swept Volumes.
	Thick Surface Adds material to a surface in two opposite directions. See Creating a Thick Surface
	Close Surface Closes surfaces. See Creating a Close Surface
	Draft Creates a draft by selecting a neutral element on molded 3D shapes to make them easier to remove from molds. See Creating a Draft
	Shell Creates a cavity. See Creating a Shell
	Thickness Adds thickness to a 3D shape. See Creating Thicknesses
	Add See Flyout for Add.

Flyout for Volume Extrude


	Volume Extrude Creates a volume by extruding a profile along a given direction. See Creating Extruded Volumes
	Volume Resolve Creates a revolution surface by revolving a planar profile about an axis. See Creating Revolved Volumes


	Add Adds a body. See Adding Bodies.
	Remove Removes a body. See Removing Bodies.
	Intersect Intersects bodies. See Intersecting Bodies.