|
-
Create Spot Trajectory
- Creates a table of manufacturing positions to spot weld or rivet. It can be
created from a process plan that implements design fasteners, or, in the case of
a non-process planning scenario, from the design fasteners or by importing a
spreadsheet that specifies the manufacturing positions.
- See Creating a Spot Trajectory
|
|
-
Update Spot Trajectory
- Updates a spot weld trajectory when changes occur in the design position of
spot fasteners.
- See Synchronizing a Spot Weld Trajectory
|
 |
-
Convert Spot Trajectories for Programming
- Converts Process trajectories to Resource trajectories by disconnecting from
process plan.
- See Converting Spot Trajectories for Programming
|
|
-
Spot Welding Profile
- Defines the parameters used in the motion of the robot and the gun during the spot welding process.
-
See Creating a Spot Profile
|
 |
-
Create Rivet Profile
- Defines the parameters used in the motion of the robot and the gun during the riveting process.
- See Creating a Rivet Profile
|
|
-
Generate Robot Task
- Creates a robot task containing spot or rivet operations, created from and
spot or rivet trajectory and associated profiles.
- See Generating a Spot or Rivet Task
|
|
-
Update Spot Task
- Synchronizes a weld task with the spot weld trajectory when the trajectory has
been modified.
- See Synchronizing a Spot Weld Task
|
|
-
Automatic Collision Avoidance
- Automatically runs through all process points, finds motions with clash, and
solves them by rotating the process point (manufacturing fastener) or creating
additional via points.
- See Generating a Collision-Free Path
|
 |
-
Planning Programming Consistency Check
- Verifies that robot task detailing is consistent with planning in the current
session.
- See Verifying Consistency Between Programming and Planning
|
|
-
Ordering By Sequence
-
- See Reordering By Sequence in the Manufacturing Process
Planning guide.
|
|
-
Manufacturing System Gantt
-
- See Accessing and Using the System-Operation-Track Gantt Chart in
the Manufacturing Assembly Evaluation guide
- .
|
|
-
Hide Gantt
-
- See Accessing and Using the System-Operation-Track Gantt Chart in
the Manufacturing Assembly Evaluation guide.
|