Molded Part Section

The Molded Part section of the action bar provides commands for preparing the molded part.

This page discusses:

Injection Point
Creates Injections Points on a surface or a curve, with Gate characteristics and position.
See Creating Injection Points and Gates.
Pulling Direction
Creates the main and secondary pulling directions.
See Creating a Pulling Direction.
Undercut Geometries
Computes undercut geometries of a shape along a pulling direction.
See Creating Undercut Geometries.
Parting Line
Creates the geometrical junction line that parts the mold into cavity and core .
See Creating a Parting Line.
Extract Mold Areas
Organizes the faces computed from the pulling direction into mold areas.
See Extracting Mold Areas Surfaces.
Explode Mold Areas
Displays an exploded view of the mold areas.
See Exploding Mold Areas.
Transfer Mold Area Element
Transfers an element from one mold area to another and keeps the structure of any element built on it.
See Transferring Elements.
Aggregate Mold Area
Aggregates surfaces of a mold area to improve performances.
See Aggregating Mold Areas.
Split Mold Area
Cuts and relimits a mold area element using a cutting element.
See Splitting a Mold Area.
Spline
See #ccv-r-ui-ActBar-MoldedPart-Primary__rs-Curves.
Split
Splits a surface or wireframe element using a cutting element.
Fill Separation Surface
Fills holes generated by inner boundaries of surfaces.
See Filling Separation Surfaces.
Shut Off Surface
Fills holes generated by inner boundaries of surfaces.
Parting Surface
See Flyout for Creating Parting Surfaces
Surface Extension
Extends a surface on defined working areas.
See Creating a Surface Extension.


Fillet Connect
Creates fillets to fill or extend surfaces.
See Creating a Fillet Connect.
Connect Surface
Fills the gap between extended surfaces.
See Creating a Connect Surface.
Wall Surface
Creates wall surface to represent the simple preformed sheet of metal that connects the stamped part to the binder.
See Creating Wall Surfaces.
Wall Surface Manager
Creates wall surfaces from sketch to represent the simple preformed sheet of metal that connects the stamped part to the binder. Detects intersections between wall surfaces and creates fillets.
See Creating a Wall Surface Manager.
Surface Offset
Creates a local offset on a surface, using a wireframe section.
See Creating a Local Offset on a Surface.
Extrude

See #ccv-r-ui-ActBar-MoldedPart-Primary__rs-Surfaces.

Molded Part Side Surfaces

Assembles the different parts of the Molded Part Side Surfaces .

The resulting typed features are automatically selected in Inserts and Molded Part Publications.

See Creating Molded Part Side Surfaces.
Insert Manager
Generates or edits inserts from the core and cavity surfaces.
See Creating an Insert Manager.
Form Block
Generates or edits volumes up to the plastic part for inner inserts, sliders or lifters.
See Creating a Form Block.
Molded Part Publications
Creates the Molded Part and its Publications.
See Defining a Molded Part and Its Publications.
Electrode
Creates an electrode from a cavity, to be machined in a die sinking process.
See Creating Electrodes.
Electrode Documentation
Creates the electrode documentation as a drawing.
See Generating the Electrode Documentation.

Flyout for Creating Parting Surfaces

Parting Surface
Creates a parting surface from the pulling direction and the shape (surfaces).
See Creating a Parting Surface.
Ruled Parting Surface
Creates a parting surface from the parting line and a direction.
See Creating a Ruled Parting Surface.

Flyout for Extrapolation

Boundary Analysis
Creates an analysis of boundaries in order to extend them.
See Creating a Boundary Analysis Manager.
Surface Extension Manager
Creates a Surface Extension Manager based on Analysis Boundary
See Creating a Surface Extension Manager.

Flyout for Creating Curves

Spline
Creates spline curves.
Connect Curve
Creates a connecting curve between two curves.
Curve on Surface
Creates a curve on a surface, point by point, or as isoparametric or tangent curve.
See Creating Free Form Curves on Surfaces.
Stable Split Curve
Creates a curve by specifying two vertices on a surface boundary.
See Specifying a Functional Area by a Stable Split Curve.

Flyout for Creating Surfaces

Extrude
Creates an extruded surface by extruding a profile along a given direction.
Sweep
Creates a swept surface by sweeping out a profile in planes normal to a spine curve.
Fill
Creates a fill surface between boundary segments.
Multi-Sections Surface
Creates a multi-section surface by sweeping one or more section curves along an automatically computed or user-defined spine.
Blend
Creates a blended surface between two wireframe elements.
Light Surface
Creates a light surface from an existing surface.
See Creating a Light Surface.
Join
Assemble adjacent curves or surfaces to one element.