Volume Section

The Volume section of the action bar provides commands for creating volumes.

This page discusses:

Flyout for Volume Extrude
Flyout for Draft Angle
Flyout for Add


	Volume Extrude See Flyout for Volume Extrude
	Multi-Sections Volume Creates a multi-sections volume by sweeping one or more closed section curves along a spine. See Creating Multi-Sections Volumes.
	Volume Sweep Creates a swept volume by sweeping out a closed profile in planes normal to a spine curve. See Creating Swept Volumes.
	Solid Tool Sweep Moves a symmetrical 2D profile along a specified path in the 3D area. See Creating the Tool Sweep
	Thick Surface Adds material to a surface in two opposite directions. See Creating a Thick Surface
	Close Surface Closes surfaces. See Creating a Close Surface
	Draft Angle See Flyout for Draft Angle
	Shell Creates a cavity. See Creating a Shell
	Sew Surface Combines a surface with a volume. See Creating a Sew Surface
	Thickness Adds thickness to a 3D shape. See Creating Thicknesses
	Add See Flyout for Add
	Defeaturing Selectively removes recognized holes and fillets. See Defeaturing with Filters

Flyout for Volume Extrude


	Volume Extrude Creates a volume by extruding a profile along a given direction. See Creating Extruded Volumes.
	Volume Revolve Creates a volume by revolving a planar profile about an axis. See Creating Revolved Volumes.

Flyout for Draft Angle


	Draft Angle Creates a draft by selecting a neutral element on molded 3D shapes to make them easier to remove from molds. See Creating a Draft
	Draft Variable Angle Drafts faces by using different angle values. See Creating a Variable Angle Draft
	Draft Reflect Line Drafts a face by using reflect lines as neutral lines. See Creating a Draft from Reflect Lines

Flyout for Add


	Add Adds a volume to another volume. See Adding Volumes
	Remove Removes a volume from another volume. See Removing Volumes
	Intersect Intersects a volume. See Intersecting Volumes
	Union Trim Trims a volume to define the elements to be kept or removed while performing the union operation. See Trimming Volumes