Model Section

The primary area of the Model section provides commands for creating walls and bends.

This page discusses:

Flyout for Creating Reference Elements
Flyout for Creating Walls
Flyout for Creating Flanges
Flyout for Creating a Bend
Flyout for Unfolding Bends


	Sheet Metal Parameters Creates and modifies the Sheet Metal parameters used to define your first feature. See Editing the Sheet Metal Parameters.
	Positioned Sketch Creates a positioned sketch. See Creating a Positioned Sketch from the Part Design User's Guide.
	Point See Flyout for Creating Reference Elements.
	Point or Curve Mapping Creates a point or a curve in the unfolded view from an object in the folded view and conversely. See Mapping Elements.
	Recognize Recognizes an existing 3D shape as a Sheet Metal shape. See Recognizing Features.
	Wall See Flyout for Creating Walls.
	Wall On Edge Creates a wall from the edge of a wall, a flange, a stamp, or from a profile. See Creating Walls from Edges.
	Flange See Flyout for Creating Flanges.
	Bend See Flyout for Creating a Bend.
	Bend From Flat Creates a bend based on two lines. See Creating Bends from a Line.
	Unfolding See Flyout for Unfolding Bends.
	Convert Surface Creates a volume from a complex surface created with another app. See Creating Free Form Surfaces.

Flyout for Creating Reference Elements


	Point Creates a point. See Creating Points.
	Line Creates a line. See Creating Lines.
	Plane Creates a plane. See Creating Planes.
	Axis System Creates an axis system. See Defining an Axis System.

Flyout for Creating Walls


	Wall Creates a wall from a sketch. See Creating Walls from a Sketch.
	Extrusion Extrudes planar and open profiles. See Extruding.
	Hopper Creates a canonical hopper using two sketches. See Creating Canonic Hoppers.
	Rolled Wall Creates rolled walls. See Creating Rolled Walls.

Flyout for Creating Flanges


	Flange Creates a flange using a spine. See Creating Flanges.
	Hem Creates a hem using a spine. See Creating Hems.
	Tear Drop Creates a tear drop from a spine and a profile. See Creating Tear Drops.
	User Flange Creates a flange from a spine and a manually-defined profile. See Creating User Flanges.

Flyout for Creating a Bend


	Bend Creates a bend between two walls. See Creating Bends from Walls.
	Conical Bend Creates a conical bend between two walls. See Creating Conical Bends.

Flyout for Unfolding Bends


	Unfolding Unfolds bends and flanges. See Folding Bends and Flanges.
	Folding Folds bends. See Folding Bends and Flanges.