 |
-
Producibility for Fiber Placement
-
See Flyout for Producibility.
|
 |
- Edit Producibility
Table
- Creates, edits or deletes sets of
producibility parameters.
See Editing Producibility Parameters from the Producibility Table.
|
 |
- Dart
- Creates a dart from either a line or a
curve.
See Creating Darts.
|
 |
- Flattening
- Flattens the plies
from a 3D shape to obtain a 2D shape.
See Flattening Plies.
|
 |
- Geometry
Transfer
- Transfers a point or a curve on a
ply, from 3D to 2D, or vice-versa.
See Transferring a Geometry from 2D to 3D.
|
 |
- Unfold Composites
Entity
- Creates an unfolded shape of
plies.
See Unfolding Entities.
|
 |
- Butt Splice Zone
- Defines
zones where the splicing of plies must be performed without
overlapping.
See Creating a Butt Splice Zone.
|
 |
- No Splice Zone
- Defines zones
where the splicing of plies is not allowed.
See Creating a No Splice Zone.
|
 |
- Gap Offset
- Creates a gap
offset on a no splice zone or on a butt splice zone.
See Creating a Gap Offset on a Splice Zone.
|
 | - Splice
Plies
- Creates splice plies to manage the
staggering and the overlapping between the sub-plies (cut-pieces).
See Creating Splice Plies.
|
 |
- Splice Plies from
Producibility
- Creates cut-pieces from results of simulation in
Producibility for Hand Layup.
See Creating Splice Plies from Producibility.
|
 |
- Stagger Origin
Points
- Adds a stagger origin
point.
See Adding a Stagger Origin Point.
|
