Material Calibration
Material Calibration Access to Content
About Execution Modes and Simulation Models
About Built-in Time Domain Simulation Models
About Built-in Frequency Domain Simulation Models
About Material Calibration from Finite Element Simulation Models
Time Domain Deformation Modes and Test Data
About Frequency Domain Deformation Modes and Test Data
Importing a Set of Experimental Test Data
Test Data and Imported Finite Element Models
About Test Data Import for Finite Element Models
Importing Test Data for FE Mode Calibration
Importing a Finite Element Model
Performing Data Matching for Imported Finite Element Model Material Data
Inserting a New Data Point in a Test Data Set
Deleting Individual Outliers from Test Data
Specifying Critical Points in a Test Data Set
Generating a Time History from a Set of Frequency Domain Test Data
About Material Models and Execution Modes
Supported Built-In Material Models
Specifying the Material Model in the Analytical Execution Mode
Specifying the Material Model in the Numerical and FE Execution Modes
Adjusting Advanced Solver Settings for the Numerical Execution Mode
Specifying Temperature Dependence for Material Parameters in a Material Calibration
Rate-independent Elastic-Plastic Hardening Models for Monotonic Loading
Saving Material Model Parameters to a Cache
Importing Existing Material Data for Use as the Initial Parameter Values in a Calibration
Creating a New Plot of Test Data or Response Data
Changing General Plot Information
Changing Axis Display in a Plot
Changing Data Sets and Responses Displayed in a Plot
Setting Plot Options for Individual Test Data Sets or Responses in a Plot
Calibration Algorithms and Parameter Sensitivity
Plotting Material Stability Data
Enforcing Stability Settings During the Calibration
About Exporting Calibration Data