Analysis & Output Section

The Analysis & Output section of the action bar provides commands for analyzing and producing outputs from your scenario.

This page discusses:

Flyout for Creating Scenarios
Flyout for Creating Analyses
Flyout for Creating Probes
Flyout for Managing Material Chunks
Flyout for Generating NC Code
Flyout for Managing Batch Jobs


	Simulation Object Creates a simulation object. See Creating a Simulation Object.
	New Manufacturing Scenario See Flyout for Creating Scenarios.
	New Data Readout See Flyout for Creating Analyses.
	New Machining Clash Stock Probe See Flyout for Creating Probes.
	Simulate and Generate Results Simulates and generates results for a given scenario. See Generating Scenario Results.
	Fault List Displays the list of faults with their details. See Using Collision in the Machining Simulation.
	Save Material Removal Simulation Result Saves the result of the material removal simulation of an operation. Managing Material Removal Simulation Results.
	Design Part Comparison Displays the remaining gouges and material chunks on a machined workpiece. See Flyout for Managing Material Chunks.


	Generate NC Code Interactively See Flyout for Generating NC Code.


	Creates NC Batch Job See Flyout for Managing Batch Jobs.

Flyout for Creating Scenarios


	New Manufacturing Scenario Creates a new manufacturing scenario. See Creating a Manufacturing Scenario.
	New Machining Scenario Creates a new machining scenario. See Machining Scenario Dialog box.

Flyout for Creating Analyses


	New Data Readout Creates a data readout. See Creating a Data Readout Probe.


	Measure Between Creates a Measure Between. See Defining a Measure Between Probe. See Measure Between Dialog Box.


	New Interference Creates an Interference Probe. See Using Collision in the Machining Simulation. See Defining an Interference Probe.


	Section Probe Creates a Section probe. See Creating a Section Probe.


	Camera Viewer Creates a new camera viewer. See Creating a Camera Viewer Probe.


	Motion Trace Creates a motion trace. See Creating a Motion Trace Probe.

Flyout for Creating Probes


	New Machining Clash Stock Probe Creates a new machining clash rough stock probe. See Using the Machining Simulation Browser.
	New Machine Clash Probe Creates a new machining clash probe. See Using the Machining Simulation Browser.
	New Machining Technological Probe Creates a new machining technological probe. See Using the Machining Simulation Browser.

Flyout for Managing Material Chunks


	Design Part Comparison Displays the remaining gouges and material chunks on a machined workpiece. See Comparing Machined Stock and Design Part.
	Remove Chunks Deletes the remaining chunks of material from the rough stock. See Removing Chunks of Material.

Flyout for Generating NC Code


	Generate NC Code Interactively Generates the NC code interactively. See Simulating a Machine Using NC Code.
	Manage NC Documents Manages NC Documents of every manufacturing program. See Managing NC File Containers


	Create NC Files Container Creates NC File containers. See Using NC File Containers.


	IMS® Formatter Launches the IMS® Formatter for Post Processor customization. See Customizing Post Processor for Machines with IMS ® Formatter.


	ICAM® Foundation Launches the ICAM® Foundation for Post Processor customization. See Customizing Post Processor for Machines with ICAM ® Foundation.

Flyout for Managing Batch Jobs


	Create NC Batch Job Creates and runs an NC batch computation job. See Creating an NC Batch Computation Job.
	NC Batch Queue Manages the batch jobs queue. See Managing Batch Queue.