Context Toolbars

Context toolbars are smart toolbars that contain only those commands that can be applied to the current selection.

This topic provides information about the context toolbars related to the Immersive Branch Definition command.

This page discusses:

Routing

Auto Routing Mode

Lets you design a branch route by selecting the route elements in the work area.

See Routing Branches Automatically.

Manual Routing Mode

Lets you design a branch route on the fly.

Accessible from the Auto Routing Mode.

See Routing Branches Manually

Route On Surface

Lets you design a branch route following a curve defined on an offset surface.

Accessible from the Manual Routing Mode.

See Routing Branches along a Surface.

Removal Mode

Removal Mode

Removes route elements from the branch route.

See Remove with the Removal Mode.

Delete Branch

Deletes a selected branch.

See Deleting Branches.

Creation Mode

Creation Mode

Lets you edit an existing branch and add branch points.

Add Standard Branch Point

Lets you create a standard branch point on a curve.

See Creating Standard Branch Points.

Add Associative Branch Point

Lets you create an associative branch point on a curve.

See Creating Associative Branch Points.

Add Protective Covering

Lets you add a protective covering on a segment.

Arrange Junction

Lets you arrange the junction between segments.

Accessible when selecting a branch point.

See Arranging Segments at a Junction.

Start New Branch

Lets you create a branch starting from a selected branch point.

Accessible when selecting a branch point.

See Routing Branches.

Split Branch

Accessible when selecting a branch point.

Lets you split a branch at a branch point's location.

See Splitting Branches.

Multi-Protective Protection

Accessible when selecting a branch point.

Offers the possibility to modify the protective covering's properties.

Replace / Remove

Replace routing element

Lets you edit the composition of a branch route.

Accessible from the Manual Routing Mode.

See Replacing Route Elements.

Remove from route

Removes route elements from a branch route.

Accessible from the Manual Routing Mode.

See Remove with the Manual Routing Mode.

Set/Unset as imposed Point

When working with the Flex algorithm, associates an obstacle to a branch set.

See Excluding Route Elements.

Tangency Mode

Tangency Mode

Lets you add and edit a tangential direction at a device or passing point.

Accessible from the Manual Routing Mode.

See Add Tangency.

Reverse Tangent

Lets you reverse tangency at a device or passing point.

Accessible from the Tangency Mode.

See Edit Tangency.

Remove Tangent

Lets you restore a branch curve after applying tangency.

Accessible from the Tangency Mode.

See Edit Tangency.

Transform Mode

Transform Mode

Lets you translate and rotate branch sections, and lets you manage multiprofile branches.

Translate Branch

Lets you translate a branch section to the desired location without rerouting the entire branch.

See Translating Branch Sections.

Rotate Branch Profile

Lets you orient a branch by rotating its profile.

Rotating Branch Profiles

Detailed Profile Management

Lets you create and manage multiprofile branches.

Creating and Editing Multiprofile Branches

Move Mode

Move Mode

Lets you move the position of a passing point.

Accessible from the Manual Routing Mode.

See Moving Passing Points.

Edition Mode

Edition Mode

Lets you move the position of a passing point on a support.

Accessible from the Manual Routing Mode.

See Arranging Segments in a Support.

Reverse support

Lets you reverse the direction of the branch in the support.

Accessible from the Edition Mode.

See Reverse Segments.

Arrange segment in support

Lets you move the segment to the desired location inside the support.

Accessible from the Edition Mode.

See Arrange Segments.