Stiffened Structure Concept
Stiffened Structure Concept Basics
Related Guides and Resources
Stiffened Structure Concept Access to Content
Predefined Queries
About Geometry Extraction
About Beam Profiles
User Interface
Action Bar
Standard Area
Shape Section
Materials Section
Finite Elements Section
Review Section
Scenarios Section
Post-processing Section
Feature Manager
Diagnostic Viewer
Introductory Concepts
About Rosette and Rosette Transfer Type
About Laminates
Working with 3D Shapes
Defining an Axis System
Creating Points
Creating a Point Using Coordinates
Creating a Point on a Curve
Creating a Point on a Plane
Creating a Point on a Surface
Creating a Point Using the Center of a Circle/Sphere/Ellipse
Creating a Point Tangent on a Curve
Creating a Point Between Two Points
Creating Lines
Creating a Line Between Two Points
Creating a Line Using a Point and a Direction
Creating a Line Normal to a Curve
Creating a Line Tangent to a Curve
Creating a Line Normal to a Surface
Creating a Line at the Bisection of Two Lines
Creating Planes
Creating a Plane Offset From another Plane
Creating a Plane Parallel to a Plane and through a Point
Creating a Plane Normal to another Plane
Creating a Plane Through Three Points
Creating a Plane Through Two Lines
Creating a Plane Through a Point and a Line
Creating a Plane Through a Planar Curve
Creating a Plane Normal to a Curve
Creating a Plane Tangent to a Surface
Creating a Plane Using an Equation
Creating a Mean Plane Through Points
Creating a Plane Between two Planes
Intersections
About Intersections
Creating Intersections
Creating Isoparametric Curves on Surfaces
Creating Contours
Fill Surfaces
About the Fill Command
Creating Fill Surfaces
Joining Curves or Surfaces
Extracting Elements
Simplifying Surfaces
Defining Material Parameters
Defining Materials
Defining Orientations
Defining Rosettes
Managing Laminates
Applying Materials
Material Application Concepts
About Applying Materials
About the Material Browser
Managing Materials with the Material Browser
Access Materials
Apply Materials
Replace Materials
Discard Materials
Creating a Grid
Finite Element Models
About Finite Element Model Representations
Regions Definition
Generating 1D Beam Data
Meshes
About Meshes
Mesh Part Manager
Beam Meshes
Creating Beam Meshes
Editing or Loading Beam Mesh Parameters
Surface Meshes
Creating and Editing Surface Meshes
Editing or Loading Surface Mesh Parameters
Beam Sections
About Beam Sections
Defining Beam Sections
Beam Section Options
Composite Shell Sections
About Composite Shell Sections
Defining Composite Shell Sections
Shell Sections
About Shell Sections
Defining a Shell Section
Defining Material Orientations for Shell Sections
Model Review
Performing a Numerical Analysis
Creating Grid Sections
Creating Scenarios
Analysis Cases
About Analysis Cases
Creating and Duplicating Analysis Cases
Output Requests
About Output Requests
Defining Output Requests
Static Perturbation Steps
About Static Perturbation Steps
Defining Static Perturbation Steps
Buckle Steps
About Buckle Steps
Defining Buckle Steps
Groups
About Groups
About the Group Manager
Creating Spatial Groups
Creating Proximity Groups
Couplings
About Couplings
Defining Couplings
Coupling Options
Connectors
About Connectors
Defining Connectors
Fixed Displacement Restraints
About Fixed Displacement
Applying Fixed Displacement
Loads
Forces
About Forces
Applying Forces
Gravity
About Gravity
Applying Gravity
Pressures
About Pressures
Applying Pressures
Connector Forces
About Connector Forces
Applying Connector Forces
Connector Moment
About Connector Moments
Applying Connector Moments
Connector Rotations
About Connector Rotations
Applying Connector Rotations
Connector Translations
About Connector Translations
Applying Connector Translations
Rotations
About Applied Rotations
Applying Rotations
Translations
About Applied Translations
Applying Translations
Applying Translations to Axisymmetric Models
Simulation
About Simulations
About Model and Scenario Checks
Simulation Objects
About Simulation Configuration
About Simulation Execution Locations
About Simulation Licensing Schemes
About Analysis Case Selection for Simulation Execution
Applying a Finite Element Model to a Simulation
Performing Model and Scenario Checks
Running a Simulation from an App
Post-processing
Results Query
Querying the Model
Contour and Symbol Plots
About Contour and Symbol Plots
Displaying Contour and Symbol Plots
XY Plots
About X-Y Plots
Creating an X-Y Plot from a Path
Creating Paths
Sensors
About Sensors
Creating and Plotting Field Sensors
Creating Mass Sensors
Creating Buckle Mode Sensors
Ply Stack Plots
About Ply Stack Plots
Displaying Ply Stack Plots
Customizing Ply Stack Plots
Envelope Data for Plots
About Envelope Data
Defining Envelope Data
Plot Sectioning
About Plot Sectioning
Creating Cutting Surfaces