This section lists the topics in this guide that apply to Abaqus/Explicit.
This page discusses:
Analysis of a speaker using Abaqus-Dymola co-simulation
Convergence studies for shock analyses using shell elements
Deformation of a sandwich plate under CONWEP blast loading
Fully and sequentially coupled acoustic-structural analysis of a muffler
Long-duration response of a submerged cylinder to an underwater explosion
Response of a submerged cylinder to an underwater explosion shock wave
UNDEX analysis of a detailed submarine model
Buckling of a column with spot welds
Cask drop with foam impact limiter
Collapse of a stack of blocks with general contact
Confined compression of multiple two-dimensional cylinders with different material properties
Crimp forming with general contact
Eroding projectile impacting eroding plate
Explosive pipe closure
High-velocity impact of a ceramic target
Knee bolster impact with general contact
Oblique impact of a copper rod
Progressive failure analysis of thin-wall aluminum extrusion under quasi-static and dynamic loads
Rigid projectile impacting eroding plate
Seismic analysis of a concrete gravity dam
Tennis racket and ball
Water sloshing in a baffled tank
Dynamic impact of a scooter with a bump
Impact of a water-filled bottle
Rivet forming
Axisymmetric extrusion: transient and steady-state
Axisymmetric forming of a circular cup
Cup/trough forming
Extrusion of a cylindrical metal bar with frictional heat generation
Flat rolling: transient and steady-state
Forging with multiple complex dies
Forging with sinusoidal dies
Ring rolling
Rolling of thick plates
Section rolling
Stretching of a thin sheet with a hemispherical punch
Two-step forming simulation
Upsetting of a cylindrical billet: coupled temperature-displacement and adiabatic analysis
Upsetting of a cylindrical billet: quasi-static analysis with mesh-to-mesh solution mapping (Abaqus/Standard) and adaptive meshing (Abaqus/Explicit)
Debonding behavior of a double cantilever beam
Debonding behavior of a single leg bending specimen
Failure of blunt notched fiber metal laminates
Postbuckling and growth of delaminations in composite panels
Thermal-stress analysis of a disc brake
Deep drawing of a square box
Springback of two-dimensional draw bending
Application of bushing connectors in the analysis of a three-point linkage
Crank mechanism
Cylinder-cam mechanism
Driveshaft mechanism
Flap mechanism
Gear assemblies
Tail-skid mechanism
Seat belt analysis of a simplified crash dummy
Side curtain airbag analysis using the lumped kinetic molecular method
Side curtain airbag impactor test
Mixing of granular media in a drum mixer
Joining data from multiple results files and converting file format: FJOIN
Collapse of a concrete slab
Damage and failure of a laminated composite plate
Hydrostatic fluid elements: modeling an airspring
Indentation of a thick plate
Indentation of an elastomeric foam specimen with a hemispherical punch
Parametric study of a linear elastic pipeline under in-plane bending
Self-contact in rubber/foam components: jounce bumper
Self-contact in rubber/foam components: rubber gasket
Shell-to-solid submodeling and shell-to-solid coupling of a pipe joint
Analysis of a solid disc with Mullins effect and permanent set
Import of a steady-state rolling tire
Continuum modeling of automotive spot welds